Earth-Friendly Print Products in the San Francisco Bay Area

Earth-Friendly Print Products in the <span>San Francisco Bay Area</span>

SpeedPro’s green products

One of the easiest and most cost efficient ways to protect the environment is the use of LED lights, primarily used in any backlit or illuminated signs. Just as turning off a light when you leave a room saves electricity, so does using long lasting LED lights. When compared to regular lights, LEDs are more energy-efficient, meaning less energy is used to power any sign illuminated with LEDs. LED bulbs use at least 75% less energy than incandescent lighting and lasts around 25 times longer. Because they last longer, less waste is produced, a very environmentally-friendly step. SpeedPro recommends you check out our full line of LED Color Blast Accent Lights, Slimline Led Lights and LED Flood Accent Lights to find the best match for your business sign needs.

Eco-friendly alternative substrates are materials that have been proven to have a lower environmental impact and are reusable and recyclable at higher amounts further reducing waste. These include:

  • Enviroboard ® 
  • Falconboard
  • ConVerd board
  • Ecologic Recyclable Solvent Banners
  • Decolit Roll-up banner
  • BIOflex Biodegradable banner 

Enviroboard® MR (Moisture Resistant) is an exceptional multi-ply, water-resistant, green alternative to corrugated plastic boards and foam board. It can be used as a direct print to substrate or as mounting substrate. SpeedPro uses this substrate to create indoor Point of Purchase (POP) displays and hanging and upright signs. Enviroboard® MR is 100% recyclable and made of 10% PCW (post-consumer waste).

Falconboard signs are a rigid paper-based substrate that functions like heavy-duty foamboards, similar to Ultraboard Gatorboard, except the foam has been replaced with a honeycomb core of kraft board. This improvement creates a cost-effective green solution for mounting applications and an aesthetically pleasing funky “cut corrugated box” look of open-cell sides. Falconboard is lightweight, has cost-effective pricing, high rigidity and is 100% recyclable. Falconboard creates a cost-effective environmentally-friendly solution for graphic applications and is certified by the Sustainable Forestry Initiative (SFI) to be recyclable with corrugated waste and is in fact made with SFI certified, renewable virgin, all-natural and post-consumer recycled fibers.

ConVerd Board is a rigid, fiber-based, recyclable alternative for structural signage applications that is a green alternative to PVC and styrene-based boards. It is 100% recyclable and uses 10% post-consumer waste.

green products
sustainable printing products

EcoLogic Solvent Recyclable Banners are a multi-use vinyl banner material that is 100% recyclable. Compatible with our Latex or Eco-Solvent digital inks and Printable on one side. Ecologic Solvent Recyclable Banners are intended for indoor and outdoor use up to one year. EcoLogic is categorized as a Resin Code 7, which allows it to be truly recycled. SpeedPro is pleased with test results for this material as it is scrim based, which makes it ideal for all weather conditions and delivers saturated punchy colors.

Other ecological green banner products in our catalog include Decolit Roll-up Banner and  BIOflex Biodegradable banner, which is a heavy 15 ounce, 1000 denier banner specially designed to be biodegradable. In landfill conditions, it will biodegrade within 3-5 years. It is resistant to sunlight and weathering, chemicals, oil, and uses no toxic materials in production.

Paper Products such as corrugated cardboard and cardstock are more quality green products. Eduraposter material is a 10 mil, 235 gsm wet strength paper that is recyclable, contains 30% post-consumer recycled waste, scratch and tear-resistant. It requires no lamination and contains no PVC or PET products. And best of all, it has a similar cost to less eco-friendly products and prints beautifully.

EcoDisplay Board is an alternative to foam core and plastic signage. Made from environmentally friendly wood pulp board with no plastics composites or mineral oils. These are 100% recyclable and compostable, created with 30% pre-consumer recycled material.

SpeedPro also has an array of PVC-free wallpapers, including super-green Dreamscape Terralon™, a product made with polyester/natural fibers containing over 31% recycled materials. Terralon™ combines Type II durability and a Class “A” fire rating in a highly breathable, recyclable wallcovering.

And don’t neglect to consider the value of re-usable signs such as standing snap frames, single-sided literature racks, adjustable media walls, and Rock-It Portable signposts. Because they can be used and reused multiple times, they do not need to be thrown away and can continue to have value for years to come

Wood products are another specialty at SpeedPro. Different choices are available for finished plywood materials compatible for printing signs.

At SpeedPro, we take sustainability seriously. In addition to our eco-friendly inks and processes, we offer free graphics recycling and post-consumer recycled products. SpeedPro recycles over 90% of the waste our print shops produce. Come by any of our nationwide studios to try one of our many eco-friendly materials for your next job.

SpeedPro Marin

At SpeedPro Marin, we specialize in large format printing.  Quality printing and exceptional client service drive us everyday. We consider our clients as partners, working together to find the best solutions for your project including print materials, color and applications. If you have a vision of what you’re looking for, we can help bring that vision to life. We can also help you create that initial vision through consulting and extracting your ideas on design. That’s what we do!

Custom Large-Format Graphics

Speedpro Marin’s expertise is vast, and includes office graphics & signs, wall murals, window graphics, colored window film, event & trade show displays, floor graphics art reproduction, vehicle wraps and banners. Additionally, our CNC capabilities allow us to contour cut a variety of materials including wood, acrylic, aluminum, dimensional letters and the like.

We use the latest in printing technology, hardware and software to bring you leading innovations.

Graphic Printing for Any Size Business

Speedpro Marin serves dozens of businesses including event planners, marketing & advertising agencies, interior design firms, large business & small business and schools/universities, among others. From vehicle wraps to transforming an entire building with wall murals, we do it all with superior service and outstanding quality. Consider SpeedPro Marin your secret weapon for visual experiences!

Let’s Talk!

Our team is available to meet with you to discuss your next project.  Give us a ring or request a quote or consultation.  Speedpro Marin serves the San Francisco Bay Area including Oakland, Emeryville, Berkeley, Sausalito, San Rafael, Richmond, Petaluma,

    I would like to receive emails from SpeedPro.
    ]

    SpeedPro Marin

    Studio Owner

    Carlos Guerrero

    Hours

    Scroltop